Pratley has a wide range of versatile and cost-effective DIY adhesive products for a multitude of quick, on-the-spot automotive repairs. Our products are ideal for areas where workshops are sometimes unavailable. Here we show you how to do a quick synthetic car seat repair using Pratley Wondafix® Auto.

What you need:

• Pratley Wondafix® Auto – a strong, tough, yet flexible adhesive that is ideal for a multitude of automotive repairs
• Scissors
• Sandpaper
• Cardboard (to mix on)
• A match, toothpick, or any other mixing stick

Step One:

Read the instructions for Pratley Wondafix® Auto thoroughly. Trim the edges of the tear to be as flat and flush as possible with the rest of the seat.

Step Two:

Mix Pratley Wondafix® Auto carefully according to the instructions. Remember that the product is a 2:1 mix ratio (1 part/bead of the small tube mixed with two parts/beads of the larger tube).

Step Three:

Apply the mixed Pratley Wondafix® Auto liberally to the area. Spread it over the entire area and a little beyond the edges of the tear.

Be sure to apply within three minutes of mixing.

If necessary, you can smooth the repair over with a wet finger.

Step Four:

The repair will be completely dry in about 35 minutes. Leave for a full day (24 hours) to cure fully.

Watch our Wondafix® Auto Instructional for instructions on how to use this adhesive and for more Suggested Uses: